Protocols

Parameters for the ContinousMeasurementProtocol`

• fgFrames: Foreground frames to measure. Overwrites sequence frames

• bgFrames: Background frames to measure. Overwrites sequence frames

• pause: Pause between measurements

• controlTx: If set the tx amplitude and phase will be set with control steps

• measureBackground: If unset no background measurement will be taken

• sequence: Sequence to measure

Parameters for the MPIForceProtocol

• controlTx: If set the tx amplitude and phase will be set with control steps

• sequence: Sequence to measure

Parameters for the MPIMeasurementProtocol

• fgFrames: Foreground frames to measure. Overwrites sequence frames

• bgFrames: Background frames to measure. Overwrites sequence frames

• controlTx: If set the tx amplitude and phase will be set with control steps

• measureBackground: If unset no background measurement will be taken

• saveTemperatureData: If the temperature should be safed or not

• sequence: Sequence to measure

• reuseLastBGMeas: Do not measure background but reuse the last BG measurement if suitable

Parameters for the MPSMeasurementProtocol

• fgFrames: Foreground frames to measure. Overwrites sequence frames

• bgFrames: Background frames to measure. Overwrites sequence frames

• controlTx: If set the tx amplitude and phase will be set with control steps

• measureBackground: If unset no background measurement will be taken

• rememberBGMeas: Remember background measurement

• saveTemperatureData: If the temperature should be saved or not

• sequence: Sequence to measure

• sortPatches: Sort patches

• saveInCalibFolder: Flag if the measurement should be saved as a system matrix or not

• dfPeriodsPerOffset: Number of periods per offset of the MPS offset measurement. Overwrites parts of the sequence definition.

• averagePeriodsPerOffset: If true all periods per offset are averaged

Parameters for the MechanicalMPIMeasurementProtocol

• fgFrames: Foreground frames to measure. Overwrites sequence frames

• bgFrames: Background frames to measure. Overwrites sequence frames

• controlTx: If set the tx amplitude and phase will be set with control steps

• measureBackground: If unset no background measurement will be taken

• saveTemperatureData: If the temperature should be safed or not

• sequence: Sequence to measure

• rememberBGMeas: Remember background measurement

Parameters for the MultiSequenceSystemMatrixProtocol

• controlTx: If set the tx amplitude and phase will be set with control steps

• saveTemperatureData: If the temperature should be safed or not

• sequences: Sequences to measure

• positions: SM Positions mapped to the natural sorting of sequence tomls

• saveInCalibFolder: Flag if the calibration should be saved as a system matrix or not

• waitTime: Seconds to wait between measurements

• coolDownTo: Maximum temperature the coils can be at to start the next measurement

• bgSequence: Sequence to use as a BG measurement

• numBGMeas: Number of BG measurements before and after the measurement

Parameter for the RobotBasedMagneticFieldStaticProtocol

• sequence

• positions

• description

Parameters for the RobotBasedSystemMatrixProtocol

• waitTime: Minimum wait time between robot movements

• bgFrames: Number of background frames to measure for a background position

• fgFrames: Number of frames that are averaged for a foreground position

• saveAsSystemMatrix: Flag if the calibration should be saved as a system matrix or not

• saveTemperatureData: Flag if the temperature measured after every robot measurement should be stored in the MDF or not

• bgMeas: Number of background measurements to take

• controlTx: If set the tx amplitude and phase will be set with control steps

• sequence: Sequence used for the calibration at each position

• positions

Parameters for the RobotBasedTDesignFieldProtocol

• sequence

• radius

• center

• N

• T

Parameters for the RobotMPIMeasurementProtocol

• fgPos: Foreground position

• fgFrames: Foreground frames to measure. Overwrites sequence frames

• bgFrames: Background frames to measure. Overwrites sequence frames

• controlTx: If set the tx amplitude and phase will be set with control steps

• measureBackground: If unset no background measurement will be taken

• saveTemperatureData: If the temperature should be safed or not

• sequence: Sequence to measure

• rememberBGMeas: Remember background measurement